About the device
LoRaWAN 1.0.3 Class A weather station main unit. Reads WSS-09 9-in-1 ultrasonic sensor (wind speed 0–60 m/s, wind direction, temperature -40…+80 °C, humidity, pressure 0–120 kPa, illumination 0–200k lux, PM2.5/PM10 0–1000 µg/m³, noise 30–120 dB), WSS-08 optical or tipping-bucket rain gauge, and up to 4 additional RS485 sensors (CO2, rain/snow, PAR, TSR, DIY A1–A4) via DR-F6C-4M splitter. 12 V input/recharge, 1000 mAh Li-ion backup, IP66; external MPPT/solar power required for sensors. Default uplink 20 min. FPort 2: BAT(2) payloadVer(1) rainPulses(4) DS18B20(2) flags(1: bit7 MOD, bit5 interrupt, bits0-3 rain factor) rainDivisor(1) then fixed WSS block (ver 1 = WSS-09, ver 4 = WSS-0x T/H/P/lux) followed by TLV sensor records. MOD selects CO2 (0) or PM2.5/PM10 (1) in the WSS-09 block. FPort 5: device status (model 0x2E). Downlink encoder param cmd: tdc | mode | status | reset.
Template details
| Manufacturer | Dragino |
|---|---|
| Model | WSC2-L |
| Connectivity | LoRaWAN |
| Manufacturer website | www.dragino.com/products/agriculture-weather-station/item/335-se02-lb.html |
Use this template in Widgelix
- 01Open Asset Templates, choose Load from repository and select Dragino WSC2-L.
- 02Add an asset with the device ID and set its connectivity (network server or integration).
- 03Decoded data is available for dashboards, Actions, reports and AI agents.
Connect it through
More from Dragino
All Dragino devices →
AirFlow-LNLoRaWAN 1.0.3 Class A thermal-anemometer duct air velocity sensor for HVAC/ventilation. Runs PS-LB-NA firmware with a fixed onboard 4–20 mA air velocity transmitter; selectable range 0–5 / 0–10 / 0–30 m/s via probe model 0301/0302/0303. Also exposes 0–30 V input, IN1/IN2 digital inputs and interrupt pin. Mains powered: charging power board (7–60 V) + 12 V DC adapter. Default uplink 20 min. FPort 2: BAT(2) Probe(2) IDC mA(2) VDC V(2) flags(1) — velocity computed from probe range. FPort 3: datalog (11-byte entries with Unix time). FPort 5: device status. FPort 7/8: multi-sample IDC/VDC. Supports Report-on-Change (0x09) and datalog polling (0x31). Downlink encoder param cmd: tdc | probe | roc | roc_threshold | intmod | power | stdc | status | poll | clear_log | calibration | multdc.LoRaWAN
AQS01-LLoRaWAN 1.0.3 Class A indoor air quality sensor: CO2 (NDIR), temperature, humidity, air pressure. CO2/temperature high-low alarms, datalog, 4000 mAh batteries. FPort 2 (11 bytes): BAT(2) temp(2 signed, /100 if SHT4x flag else /10) hum(2 /10) pressure(2 /10 hPa) co2(2 ppm) flags(1: bit4 SHT4x, bit3 tempLow, bit2 tempHigh, bit1 co2Low, bit0 co2High). FPort 3 datalog (11-byte entries). FPort 5 status (0x37). Downlink cmd: tdc | status | reset.LoRaWAN
CPL01LoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor (previous generation of CPL03-LB). Open/close detect, open alarm, pulse count, last disconnect duration, datalog. FPort 2 (11 bytes): flags(1: bits2-7 calc flag, bit1 alarm, bit0 disconnect) totalPulse(3) lastDisconnectDuration min(3) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x0E). Downlink cmd: tdc | status | reset.LoRaWAN
CPL03-LB/LSLoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Two work modes: CPL01 (single contact: open/close, alarm, pulse count, last duration) and CPL03 (3 contacts PA8/PA4/PB15 with pulse counters and ROC flags). FPort 2 (11 bytes): flags(1: bit5 count mode, bit4 TDC uplink, bit3 work mode, bit2 TTRIG, bit1 alarm, bit0 open) then per mode. FPort 3 datalog, FPort 4 config, FPort 5 status (0x20), FPort 7 EXTI event. Downlink cmd: tdc | status | reset.LoRaWAN
DDS20-LB/LSLoRaWAN 1.0.3 Class A non-contact ultrasonic liquid level sensor, measures through container wall, level 20-2000 mm, accuracy +/-(5 mm + 0.5%). LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) level mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x29). Downlink cmd: tdc | status | reset.LoRaWAN
DDS45-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 30-4500 mm, accuracy +/-(1 cm + 0.3%), 60 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x28). Downlink cmd: tdc | status | reset.LoRaWAN
DDS75-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 280-7500 mm, accuracy +/-(1 cm + 0.3%), 40 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). Multi-sample mode (bit4 of byte0) sends BAT + up to 20 distances + flags. FPort 3 datalog, FPort 5 status (0x27). Downlink cmd: tdc | status | reset.LoRaWAN
DS03A-LB/LSLoRaWAN 1.0.3 Class A open/close door sensor, 1 or 2 doors. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Open alarm, open count and last open duration per door, datalog. FPort 2: 11 bytes (1 door) or 18 bytes (2 doors): flags(1: bit3 count mode, bit2 TDC uplink, bit1 alarm, bit0 open) openTimes(3) lastOpenDuration min(3) unix(4) [door2: flags(1) times(3) duration(3)]. FPort 3 datalog, FPort 4 config, FPort 5 status (0x1B). Downlink cmd: tdc | status | reset.LoRaWAN
Monitor your Dragino WSC2-L devices in Widgelix
Tell us about your deployment. We'll show you dashboards, Actions and AI access on your own devices.
- Live walkthrough with your devices
- Help with connectivity setup
- Dashboards and Actions for your use case