SW3L-LB/LS

Ready asset template for the Dragino SW3L-LB/LS in the Widgelix device repository.

LoRaWAN

Book a Demo Manufacturer website

About the device

LoRaWAN 1.0.3 Class A outdoor water flow sensor (Hall pulse flow meter DN15/DN20/DN25 variants). LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Counts pulses and converts to litres by calculate flag (0: /450, 1: /390, 2: /64, 3: /12 pulses per litre); MOD 1 = pulses per interval, else accumulated total; alarm on continuous flow; datalog. FPort 2 (11 bytes): flags(1: bits2-5 calc flag, bit1 alarm, bit0 TDC uplink) pulses(4) MOD(1: bit7 PA4, bit6 PB15, bits0-5 mode) reserved(1) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x1F). Downlink cmd: tdc | status | reset.

Template details

Manufacturer	Dragino
Model	SW3L-LB/LS
Connectivity	LoRaWAN
Manufacturer website	www.dragino.com/products/water-meter-flow-sensor/item/269-sw3l-lb-ls.html

Use this template in Widgelix

01Open Asset Templates, choose Load from repository and select Dragino SW3L-LB/LS.
02Add an asset with the device ID and set its connectivity (network server or integration).
03Decoded data is available for dashboards, Actions, reports and AI agents.

How to load a template from the repository

Connect it through

GreenMesh LoRaWAN Network ServerOur own LoRaWAN network server, built into Widgelix: gateways, devices, live traffic and downlinks in one platform, with no separate network server to run.Explore the LNS

Or keep the network you already run:

The Things Stack

Actility ThingPark

Zenner B.One Tektelic

More from Dragino

All Dragino devices →

Dragino AirFlow-LN LoRaWAN IoT device

AirFlow-LNLoRaWAN 1.0.3 Class A thermal-anemometer duct air velocity sensor for HVAC/ventilation. Runs PS-LB-NA firmware with a fixed onboard 4–20 mA air velocity transmitter; selectable range 0–5 / 0–10 / 0–30 m/s via probe model 0301/0302/0303. Also exposes 0–30 V input, IN1/IN2 digital inputs and interrupt pin. Mains powered: charging power board (7–60 V) + 12 V DC adapter. Default uplink 20 min. FPort 2: BAT(2) Probe(2) IDC mA(2) VDC V(2) flags(1) — velocity computed from probe range. FPort 3: datalog (11-byte entries with Unix time). FPort 5: device status. FPort 7/8: multi-sample IDC/VDC. Supports Report-on-Change (0x09) and datalog polling (0x31). Downlink encoder param cmd: tdc | probe | roc | roc_threshold | intmod | power | stdc | status | poll | clear_log | calibration | multdc.LoRaWAN

Dragino AQS01-L LoRaWAN IoT device

AQS01-LLoRaWAN 1.0.3 Class A indoor air quality sensor: CO2 (NDIR), temperature, humidity, air pressure. CO2/temperature high-low alarms, datalog, 4000 mAh batteries. FPort 2 (11 bytes): BAT(2) temp(2 signed, /100 if SHT4x flag else /10) hum(2 /10) pressure(2 /10 hPa) co2(2 ppm) flags(1: bit4 SHT4x, bit3 tempLow, bit2 tempHigh, bit1 co2Low, bit0 co2High). FPort 3 datalog (11-byte entries). FPort 5 status (0x37). Downlink cmd: tdc | status | reset.LoRaWAN

Dragino CPL01 LoRaWAN IoT device

CPL01LoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor (previous generation of CPL03-LB). Open/close detect, open alarm, pulse count, last disconnect duration, datalog. FPort 2 (11 bytes): flags(1: bits2-7 calc flag, bit1 alarm, bit0 disconnect) totalPulse(3) lastDisconnectDuration min(3) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x0E). Downlink cmd: tdc | status | reset.LoRaWAN

Dragino CPL03-LB/LS LoRaWAN IoT device

CPL03-LB/LSLoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Two work modes: CPL01 (single contact: open/close, alarm, pulse count, last duration) and CPL03 (3 contacts PA8/PA4/PB15 with pulse counters and ROC flags). FPort 2 (11 bytes): flags(1: bit5 count mode, bit4 TDC uplink, bit3 work mode, bit2 TTRIG, bit1 alarm, bit0 open) then per mode. FPort 3 datalog, FPort 4 config, FPort 5 status (0x20), FPort 7 EXTI event. Downlink cmd: tdc | status | reset.LoRaWAN

Dragino DDS20-LB/LS LoRaWAN IoT device

DDS20-LB/LSLoRaWAN 1.0.3 Class A non-contact ultrasonic liquid level sensor, measures through container wall, level 20-2000 mm, accuracy +/-(5 mm + 0.5%). LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) level mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x29). Downlink cmd: tdc | status | reset.LoRaWAN

Dragino DDS45-LB/LS LoRaWAN IoT device

DDS45-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 30-4500 mm, accuracy +/-(1 cm + 0.3%), 60 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x28). Downlink cmd: tdc | status | reset.LoRaWAN

Dragino DDS75-LB/LS LoRaWAN IoT device

DDS75-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 280-7500 mm, accuracy +/-(1 cm + 0.3%), 40 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). Multi-sample mode (bit4 of byte0) sends BAT + up to 20 distances + flags. FPort 3 datalog, FPort 5 status (0x27). Downlink cmd: tdc | status | reset.LoRaWAN

Dragino DS03A-LB/LS LoRaWAN IoT device

DS03A-LB/LSLoRaWAN 1.0.3 Class A open/close door sensor, 1 or 2 doors. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Open alarm, open count and last open duration per door, datalog. FPort 2: 11 bytes (1 door) or 18 bytes (2 doors): flags(1: bit3 count mode, bit2 TDC uplink, bit1 alarm, bit0 open) openTimes(3) lastOpenDuration min(3) unix(4) [door2: flags(1) times(3) duration(3)]. FPort 3 datalog, FPort 4 config, FPort 5 status (0x1B). Downlink cmd: tdc | status | reset.LoRaWAN

Monitor your Dragino SW3L-LB/LS devices in Widgelix

Tell us about your deployment. We'll show you dashboards, Actions and AI access on your own devices.

Live walkthrough with your devices
Help with connectivity setup
Dashboards and Actions for your use case