Dragino

LHT65N-DS

Ready asset template for the Dragino LHT65N-DS in the Widgelix device repository.

LoRaWAN
Book a DemoManufacturer website
Dragino LHT65N-DS LoRaWAN IoT device
About the device

LoRaWAN 1.0.3 Class A door sensor built on LHT65N: built-in SHT temperature/humidity + 1 m metal magnetic door contact, 2400 mAh battery. Runs LHT65N firmware; door contact is external sensor EXT=4 (interrupt: pin level + trigger flag) or EXT=8 (32-bit open counter). FPort 2 (11 bytes): BAT(2, bits14-15 status) tempSHT(2) hum(2) EXT(1) ext data(4). FPort 3 datalog, FPort 5 status (0x0B). Downlink cmd: tdc | ext | status | reset.

Template details

ManufacturerDragino
ModelLHT65N-DS
ConnectivityLoRaWAN
Manufacturer websitewww.dragino.com/products/lorawan-nb-iot-door-sensor-water-leak/item/327-lht65n-s-ds.html

Use this template in Widgelix

  1. 01Open Asset Templates, choose Load from repository and select Dragino LHT65N-DS.
  2. 02Add an asset with the device ID and set its connectivity (network server or integration).
  3. 03Decoded data is available for dashboards, Actions, reports and AI agents.
How to load a template from the repository

Connect it through

GreenMesh LoRaWAN Network ServerOur own LoRaWAN network server, built into Widgelix: gateways, devices, live traffic and downlinks in one platform, with no separate network server to run.Explore the LNS

Or keep the network you already run:

The Things Stack logoThe Things StackChirpStack logoChirpStackActility ThingPark logoActility ThingParkLORIOT logoLORIOTHelium logoHeliumMilesight logoMilesightSenet logoSenetZenner B.One logoZenner B.OneTektelic

More from Dragino

All Dragino devices →
Dragino AirFlow-LN LoRaWAN IoT device
AirFlow-LNLoRaWAN 1.0.3 Class A thermal-anemometer duct air velocity sensor for HVAC/ventilation. Runs PS-LB-NA firmware with a fixed onboard 4–20 mA air velocity transmitter; selectable range 0–5 / 0–10 / 0–30 m/s via probe model 0301/0302/0303. Also exposes 0–30 V input, IN1/IN2 digital inputs and interrupt pin. Mains powered: charging power board (7–60 V) + 12 V DC adapter. Default uplink 20 min. FPort 2: BAT(2) Probe(2) IDC mA(2) VDC V(2) flags(1) — velocity computed from probe range. FPort 3: datalog (11-byte entries with Unix time). FPort 5: device status. FPort 7/8: multi-sample IDC/VDC. Supports Report-on-Change (0x09) and datalog polling (0x31). Downlink encoder param cmd: tdc | probe | roc | roc_threshold | intmod | power | stdc | status | poll | clear_log | calibration | multdc.LoRaWAN
Dragino AQS01-L LoRaWAN IoT device
AQS01-LLoRaWAN 1.0.3 Class A indoor air quality sensor: CO2 (NDIR), temperature, humidity, air pressure. CO2/temperature high-low alarms, datalog, 4000 mAh batteries. FPort 2 (11 bytes): BAT(2) temp(2 signed, /100 if SHT4x flag else /10) hum(2 /10) pressure(2 /10 hPa) co2(2 ppm) flags(1: bit4 SHT4x, bit3 tempLow, bit2 tempHigh, bit1 co2Low, bit0 co2High). FPort 3 datalog (11-byte entries). FPort 5 status (0x37). Downlink cmd: tdc | status | reset.LoRaWAN
Dragino CPL01 LoRaWAN IoT device
CPL01LoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor (previous generation of CPL03-LB). Open/close detect, open alarm, pulse count, last disconnect duration, datalog. FPort 2 (11 bytes): flags(1: bits2-7 calc flag, bit1 alarm, bit0 disconnect) totalPulse(3) lastDisconnectDuration min(3) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x0E). Downlink cmd: tdc | status | reset.LoRaWAN
Dragino CPL03-LB/LS LoRaWAN IoT device
CPL03-LB/LSLoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Two work modes: CPL01 (single contact: open/close, alarm, pulse count, last duration) and CPL03 (3 contacts PA8/PA4/PB15 with pulse counters and ROC flags). FPort 2 (11 bytes): flags(1: bit5 count mode, bit4 TDC uplink, bit3 work mode, bit2 TTRIG, bit1 alarm, bit0 open) then per mode. FPort 3 datalog, FPort 4 config, FPort 5 status (0x20), FPort 7 EXTI event. Downlink cmd: tdc | status | reset.LoRaWAN
Dragino DDS20-LB/LS LoRaWAN IoT device
DDS20-LB/LSLoRaWAN 1.0.3 Class A non-contact ultrasonic liquid level sensor, measures through container wall, level 20-2000 mm, accuracy +/-(5 mm + 0.5%). LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) level mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x29). Downlink cmd: tdc | status | reset.LoRaWAN
Dragino DDS45-LB/LS LoRaWAN IoT device
DDS45-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 30-4500 mm, accuracy +/-(1 cm + 0.3%), 60 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x28). Downlink cmd: tdc | status | reset.LoRaWAN
Dragino DDS75-LB/LS LoRaWAN IoT device
DDS75-LB/LSLoRaWAN 1.0.3 Class A ultrasonic distance sensor, 280-7500 mm, accuracy +/-(1 cm + 0.3%), 40 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). Multi-sample mode (bit4 of byte0) sends BAT + up to 20 distances + flags. FPort 3 datalog, FPort 5 status (0x27). Downlink cmd: tdc | status | reset.LoRaWAN
Dragino DS03A-LB/LS LoRaWAN IoT device
DS03A-LB/LSLoRaWAN 1.0.3 Class A open/close door sensor, 1 or 2 doors. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Open alarm, open count and last open duration per door, datalog. FPort 2: 11 bytes (1 door) or 18 bytes (2 doors): flags(1: bit3 count mode, bit2 TDC uplink, bit1 alarm, bit0 open) openTimes(3) lastOpenDuration min(3) unix(4) [door2: flags(1) times(3) duration(3)]. FPort 3 datalog, FPort 4 config, FPort 5 status (0x1B). Downlink cmd: tdc | status | reset.LoRaWAN

Monitor your Dragino LHT65N-DS devices in Widgelix

Tell us about your deployment. We'll show you dashboards, Actions and AI access on your own devices.

  • Live walkthrough with your devices
  • Help with connectivity setup
  • Dashboards and Actions for your use case
Book a Demo

We'll reply within one business day.