# Dragino SW3L Decoder & Integration | Widgelix URL: https://greenmesh.org/product/asset-templates/dragino/sw3l > LoRaWAN 1.0.3 Class A outdoor water flow sensor (previous generation of SW3L-LB). Counts pulses and converts to litres by calculate flag (0: /450, 1:… --- [Asset Templates](https://greenmesh.org/product/asset-templates) / [Dragino](https://greenmesh.org/product/asset-templates/dragino) / SW3L [Dragino](https://greenmesh.org/product/asset-templates/dragino) # SW3L Ready asset template for the Dragino SW3L in the Widgelix device repository. LoRaWAN [Manufacturer website](https://www.dragino.com/products/water-meter-flow-sensor/item/222-sw3l.html) ![Dragino SW3L LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/sw3l.jpg) About the device LoRaWAN 1.0.3 Class A outdoor water flow sensor (previous generation of SW3L-LB). Counts pulses and converts to litres by calculate flag (0: /450, 1: /360, 2: /60 pulses per litre); MOD 1 = pulses per interval, else accumulated total; continuous-flow alarm; datalog. FPort 2 (11 bytes): flags(1: bits2-7 calc flag, bit1 alarm) pulses(4) MOD(1) reserved(1) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x11). Downlink cmd: tdc | status | reset. ## Template details | Manufacturer | [Dragino](https://greenmesh.org/product/asset-templates/dragino) | Model | SW3L | Connectivity | LoRaWAN | Manufacturer website | [www.dragino.com/products/water-meter-flow-sensor/item/222-sw3l.html](https://www.dragino.com/products/water-meter-flow-sensor/item/222-sw3l.html) ## Use this template in Widgelix - 01 Open Asset Templates, choose Load from repository and select Dragino SW3L. - 02 Add an asset with the device ID and set its connectivity (network server or integration). - 03 Decoded data is available for dashboards, Actions, reports and AI agents. [How to load a template from the repository](https://docs.widgelix.com/asset-templates/load-from-repository) ## Connect it through [GreenMesh LoRaWAN Network Server Our own LoRaWAN network server, built into Widgelix: gateways, devices, live traffic and downlinks in one platform, with no separate network server to run. Explore the LNS](https://greenmesh.org/product/lorawan-server) Or keep the network you already run: [![The Things Stack logo](https://greenmesh.org/images/widgelix/connections/ttn.png) The Things Stack](https://greenmesh.org/platform/integrations/the-things-stack) [![ChirpStack logo](https://greenmesh.org/images/widgelix/connections/chirpstack.png) ChirpStack](https://greenmesh.org/platform/integrations/chirpstack) [![Actility ThingPark logo](https://greenmesh.org/images/widgelix/connections/actility.png) Actility ThingPark](https://greenmesh.org/platform/integrations/actility-thingpark) [![LORIOT logo](https://greenmesh.org/images/widgelix/connections/loriot.png) LORIOT](https://greenmesh.org/platform/integrations/loriot) [![Helium logo](https://greenmesh.org/images/widgelix/connections/helium.png) Helium](https://greenmesh.org/platform/integrations/helium) [![Milesight logo](https://greenmesh.org/images/widgelix/connections/milesight.png) Milesight](https://greenmesh.org/platform/integrations/milesight) [![Senet logo](https://greenmesh.org/images/widgelix/connections/senet.png) Senet](https://greenmesh.org/platform/integrations/senet) [![Zenner B.One logo](https://greenmesh.org/images/widgelix/connections/zenner.svg) Zenner B.One](https://greenmesh.org/platform/integrations/zenner) [T Tektelic](https://greenmesh.org/platform/integrations/tektelic) ## More from Dragino [All Dragino devices →](https://greenmesh.org/product/asset-templates/dragino) ![Dragino AirFlow-LN LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/airflow-ln.png) AirFlow-LN LoRaWAN 1.0.3 Class A thermal-anemometer duct air velocity sensor for HVAC/ventilation. Runs PS-LB-NA firmware with a fixed onboard 4–20 mA air velocity transmitter; selectable range 0–5 / 0–10 / 0–30 m/s via probe model 0301/0302/0303. Also exposes 0–30 V input, IN1/IN2 digital inputs and interrupt pin. Mains powered: charging power board (7–60 V) + 12 V DC adapter. Default uplink 20 min. FPort 2: BAT(2) Probe(2) IDC mA(2) VDC V(2) flags(1) — velocity computed from probe range. FPort 3: datalog (11-byte entries with Unix time). FPort 5: device status. FPort 7/8: multi-sample IDC/VDC. Supports Report-on-Change (0x09) and datalog polling (0x31). Downlink encoder param cmd: tdc | probe | roc | roc_threshold | intmod | power | stdc | status | poll | clear_log | calibration | multdc. LoRaWAN ![Dragino AQS01-L LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/aqs01-l.jpg) AQS01-L LoRaWAN 1.0.3 Class A indoor air quality sensor: CO2 (NDIR), temperature, humidity, air pressure. CO2/temperature high-low alarms, datalog, 4000 mAh batteries. FPort 2 (11 bytes): BAT(2) temp(2 signed, /100 if SHT4x flag else /10) hum(2 /10) pressure(2 /10 hPa) co2(2 ppm) flags(1: bit4 SHT4x, bit3 tempLow, bit2 tempHigh, bit1 co2Low, bit0 co2High). FPort 3 datalog (11-byte entries). FPort 5 status (0x37). Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino CPL01 LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/cpl01.jpg) CPL01 LoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor (previous generation of CPL03-LB). Open/close detect, open alarm, pulse count, last disconnect duration, datalog. FPort 2 (11 bytes): flags(1: bits2-7 calc flag, bit1 alarm, bit0 disconnect) totalPulse(3) lastDisconnectDuration min(3) unix(4). FPort 3 datalog, FPort 4 config, FPort 5 status (0x0E). Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino CPL03-LB/LS LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/cpl03-lb-ls.jpg) CPL03-LB/LS LoRaWAN 1.0.3 Class A outdoor open/close dry contact sensor. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Two work modes: CPL01 (single contact: open/close, alarm, pulse count, last duration) and CPL03 (3 contacts PA8/PA4/PB15 with pulse counters and ROC flags). FPort 2 (11 bytes): flags(1: bit5 count mode, bit4 TDC uplink, bit3 work mode, bit2 TTRIG, bit1 alarm, bit0 open) then per mode. FPort 3 datalog, FPort 4 config, FPort 5 status (0x20), FPort 7 EXTI event. Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino DDS20-LB/LS LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/dds20-lb-ls.jpg) DDS20-LB/LS LoRaWAN 1.0.3 Class A non-contact ultrasonic liquid level sensor, measures through container wall, level 20-2000 mm, accuracy +/-(5 mm + 0.5%). LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) level mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x29). Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino DDS45-LB/LS LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/dds45-lb-ls.jpg) DDS45-LB/LS LoRaWAN 1.0.3 Class A ultrasonic distance sensor, 30-4500 mm, accuracy +/-(1 cm + 0.3%), 60 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). FPort 3 datalog, FPort 5 status (0x28). Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino DDS75-LB/LS LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/dds75-lb-ls.jpg) DDS75-LB/LS LoRaWAN 1.0.3 Class A ultrasonic distance sensor, 280-7500 mm, accuracy +/-(1 cm + 0.3%), 40 deg beam. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh. FPort 2 (8 bytes): BAT(2) distance mm(2) interruptFlag(1) tempDS18B20(2 signed /10) sensorFlag(1). Multi-sample mode (bit4 of byte0) sends BAT + up to 20 distances + flags. FPort 3 datalog, FPort 5 status (0x27). Downlink cmd: tdc | status | reset. LoRaWAN ![Dragino DS03A-LB/LS LoRaWAN IoT device](https://greenmesh.org/images/devices/dragino/ds03a-lb-ls.jpg) DS03A-LB/LS LoRaWAN 1.0.3 Class A open/close door sensor, 1 or 2 doors. LB: 8500 mAh Li-SOCl2; LS: solar + 3000 mAh Li-ion. Open alarm, open count and last open duration per door, datalog. FPort 2: 11 bytes (1 door) or 18 bytes (2 doors): flags(1: bit3 count mode, bit2 TDC uplink, bit1 alarm, bit0 open) openTimes(3) lastOpenDuration min(3) unix(4) [door2: flags(1) times(3) duration(3)]. FPort 3 datalog, FPort 4 config, FPort 5 status (0x1B). Downlink cmd: tdc | status | reset. LoRaWAN ## Monitor your Dragino SW3L devices in Widgelix Tell us about your deployment. We'll show you dashboards, Actions and AI access on your own devices. - Live walkthrough with your devices - Help with connectivity setup - Dashboards and Actions for your use case